heat release rate tester for plastics

Brand Name:SKYLINE

Model Number:SL833

Place of Origin:China

...Heat Release Rate Tester Stainless Steel Combustion Test Chamber OSU Heat Release Rate Tester.pdf Product information The OSU heat release rate tester approved by FAA of the Federal Aviation Administration of the United States was originally designed by Smith of Ohio State University in 1972, and later became a FAA designated combustion test instrument for testing the heat release rate...

Brand Name:GOLD

Model Number:GD-ISO 1716

Place of Origin:China

Building Materials Heat Release ISO 1716 Bomb Calorimeter Testing Apparatus ISO1716 Bomb Calorimeter Product Introduction: This instrument is specially used to determine the combustion calorific value of building materials. It can accurately measure the ...

Brand Name:DAXIAN

Model Number:DX8368B

Place of Origin:China

China ASTM E 1537 Heat Release Rate Tester/Large Calorimeter Scope of application: 10MW Heat Release Rate Tester applicable to buildings and large complexes (including locomotives, vehicles, furniture, warehouses and construction methods), as well as ...

Brand Name:HOOHA

Model Number:ZY6264

Place of Origin:China

ZY6264 10MW heat release rate test device 1.Scope of application: Applicable to buildings and large complexes (including locomotive vehicles, vehicles, warehouses and components) and extensive fire resistance test verification for raw materials, buildings...

Brand Name:AI

Model Number:MOSU

Place of Origin:CHINA

Rate of Heat Release (OSU) Tester Introduction: The OSU heat release rate tester, originally designed by Smith of Ohio State University in 1972, became FAA's designated combustion tester. The test standards are FAR Part 25 Appendix F Part IV, Airbus AITM 2.0006, Boeing BSS 7322 and ASTM E906. The Heat Release Rate (OSU) test is used by the aerospace/aviation industry to determine the heat release rate...

Brand Name:YUYANG

Model Number:YY501

Place of Origin:China

Building Material Heat Release Rate Flammability Testing Machine / Cone Calorimeter Application: Combustion product stream through the oxygen concentration of the oxygen consumption and calculate the heat release rate, heat release rate of the material is ...

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

... stands as a technological marvel. This sophisticated electronic machine tester is the cornerstone for accurately assessing the flammability and heat release characteristics of a vast array of materials, from building components to consumer products. 1.

Brand Name:JHH

Model Number:XNR-400D

Place of Origin:Beijing, China

...rate, Melt-volume flow rate determinator for plastic Product Description: The melt flow rate meter works by melting the plastic sample into a heating cylinder and then pressing the melt into the tester by a quantitative mold method. The piston in the tester...

Brand Name:lixian

Model Number:HZ-Building Material Fire Tester-4

Place of Origin:CHINA

...performance standards, room corner combustion tester control platform to provide independent gas analysis, including heat release rate and other related test required for related instruments, such as paramagnetic oxygen sensor, CO2/CO measuring instrument,

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:China

..., polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Standards: GB/T3682-2000,ISO1133-97, ASTM1238 Characteristics: 1) Fast heating speed, very small overshoot. 2) High precision of

Brand Name:VOUCH

Model Number:6810

Place of Origin:CHINA

Cone calorimeter Description: Cone calorimeter is the tester equipment of test material heat release which is designed by oxygen consumption principle.The principle of oxygen consumption is that each unit of oxygen consumed produces same amount of heat whe...

Brand Name:POOTAB,PERFECT

Model Number:PT-6099

Place of Origin:China

...Tester 30000mm Per Minute 180° Stripping Use: This machine is suitable for the tensile strength, peel strength, deformation of plastic films, composite films, adhesives, adhesive tapes, medical patches, protective films, release paper, rubber, artificial leather, paper fibers and other products Performance tests such as rate...

Brand Name:Delta

Model Number:IMO

Place of Origin:China

...Tester Introduction: IMO Imo Resolution Spread of Flame Tester is used to evaluate combustion characteristics of building materials and ship materials and measures spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release...

Brand Name:ZL

Model Number:ZL-3015A

Place of Origin:China

Plastic HDT VICAT Softening Point Temperature Tester , Plastic Molds HDT Vicat Tester Specification: Temperature range Room temperature - 300°C Heating rate (120±10)°C/h (12±1°C/6min); (50±5)°C/h(5±0.5°C/6min) Temperature error 0.1°C Temperature accuracy ±0.5°C Max. deflection error ±0.01mm Deflection measuring range 0-1.5mm Sample holder 3 pieces Load pole and pallet weight 68g Heating medium methyl silicone oil or Transformer oil Heating...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-B617-S

... Tester Application: Tested sample: plastic films, laminated materials, adhesive tapes, adhesive bandage (plaster), release paper, plastic films, leather, rubber & plastic, paper, fiber, etc. Different test with different grips: tensile, peel, tear, heat ...

Brand Name:LIYI

Place of Origin:China

Model Number:LY-RR

..., polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Characteristics: 1. Fast heating speed, very small overshoot. 2.

Brand Name:BAXIT

Model Number:GLO-MF46

Place of Origin:CHINA

Digital Plastic Melt Flow Rate Tester Index Test Machine Product Description Equipment Overview 1. The heating cylinder is made of Hastelloy to avoid oxidizing and rusting at the high temperature (up to 400-500 degrees) for a long time. 3. Dual sensor ...

Brand Name:Ciyu

Model Number:Ciyu10001

Place of Origin:China

Degradation PLA transparent film Environmental Protection Biodegradable Plastic Film No Residual Heat Seal Transparent Thickness range 30-100μm Standard volume length 2000m,4000m Multiples of standard roll length available 2,3,4 Cutting width according to ...

Brand Name:Annhung

Model Number:AH-MI/E

Place of Origin:Shenzhen, China

... light transmission up to 90%, anti-UV, aging resistance, ignitability rate UL-94V0. 2. House of the light is made of die casting aluminum and painted by spraying plastics finish. It is light, good ability of heat release, waterproof, impact resistance,

Brand Name:BonninTech

Model Number:XNR-400E

Place of Origin:Wuhan, China

XNR-400E Melt Flow Index is used for determination of melt flow rate properties of thermoplastic (such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc) under high temperature, according to test methods of GB/T3682, ISO1133, ASTM D1238 test standard...