eddy current non destructive testing probe

Place of Origin:XIAMEN,china

Brand Name:COBE

...eddy current testing system 1, intro This off-line eddy currment detecting equlipment is used in high accuracy flaw testing for workplece that already be finished. Automatic testing procedure: Using up-loading system, via roller way, the workpiece was sent to the eddy current detecting area, through magnetic saturation, probe...

Brand Name:SINOWON

Model Number:TG-400

Place of Origin:DONGGUAN CHINA

Features: ● With different external probes, the gauge can be applied to measuring thickness of non-magnetic coating on magnetic metal substrate, as well as non-conductive coating on non-magnetic metal substrate. ● Five types of probes (F400, F1, F10, N1, ...

Brand Name:TMTeck

Place of Origin:China

tubing ID PROBES for eddy current Flaw Detection Good probe design and proper probe structure can enhance the defect signal which is difficult to detect and make it easy to be detected. With many years of probe production experience, careful design and ...

Brand Name:Suzhou Desisen (DSS) Electronics

Model Number:ETP-2

Place of Origin:China

...workbench. 2. Balanced point probe, high detection sensitivity. 3. Using vibrating disk feeding mechanism, non-contact detection, high degree of automation of gate sorting. 4. Using fluorescent wave tube and height luminescent tube, the detection ...

Brand Name:HUATEC

Model Number:HEF-C35RFT

Place of Origin:China

Product Description: Eddy Current Testing Equipment is a reliable and efficient tool for eddy current inspection, designed for easy and accurate testing. This eddy current testing equipment features an alarm output with triode OC gate, adjustable gain fro...

Brand Name:GTJ

Model Number:GTJ-L800

Place of Origin:China

... the thickness of concrete or other non-ferromagnetic media; in use, the transmitting probe and the receiving probe are placed on the floor respectively. The two opposite test surfaces respectively transmit and receive electromagnetic signals, and the

Place of Origin:China

Brand Name:HUATEC

Model Number:TG4000

Non Destructive Testing Equipment Through Coating Ultrasonic Thickness Gauge TG 4000 with Velocity Range 1000 - 9999 m/s TECHNICAL DATA Display 128X64 Pixel LCD with backlight Measuring range (in two function modes of Standard mode and through coating mode) Standard mode 0.8 mm-- 300.0 mm in steel depending on the probe. Special request can reach measuring range up to 500mm Through coating mode 2.5 mm – 18.0 mm (Probe...

Brand Name:iqualitrol

Model Number:SRT-6210

High Accuracy Easy Use Non Destructive Portable Surface Roughness Tester with RS232 Model: SRT-6210 Technical Data Download: iqualitrol Surface Roughness Tester SRT-6210 When measuring the roughness of surface, the sensor is placed on the surface and then ...

Brand Name:EPRO

Model Number:PR6424/010-140

Place of Origin:Germany

PR6424/010-140 EPRO 16mm Eddy Current Sensor PR6424/010-140.pdf Product Details: Manufacture: EPRO Model:PR6424/010-140 Ordering Information: PR6424/010-140 Catalog PR6424 Description: EPRO PR6424/010-140 EPRO 16mm Eddy Current Sensor HS Code: 85389091 ...

Brand Name:Gold

Model Number:ZBL-U5600

Place of Origin:Chongqing, China

... tubes or probes embedded in the concrete. One probe acts as a transmitter, while the other acts as a receiver. As the ultrasonic waves travel through the concrete, they are reflected back to the receiver by any discontinuities or changes in the concrete's

Brand Name:iqualitrol

Model Number:CM-1210-200N

Place of Origin:DONGGUAN

Coating Thickness Gauge CM-1210-200N for Non-Conductive Coatings on Non-magnetic Metals Brief Introduction: The F probes measure the thickness of non-magnetic materials on magnetic materials. The N probes measure the thickness of non-conductive coatings...

Brand Name:Btutest

Model Number:BTU-CWG

Place of Origin:Made in China

Crack Width Gauge Concrete Testing Equipment Features: Newly upgraded, with three proof shell design, waterproof, dustproof and shockproof; Imported sensor chip is adopted, with high test accuracy; The host screen is provided with scale marks, which is ...

Brand Name:Raytech

Model Number:RTG-510

Place of Origin:China

... IN STEEL DEPENDING OF THE PROBE special request can reach measuring range up to 500mm THROUGH COATING 2.5 mm – 18 mm ( DEPNDING OF THE PROBES ) TOLERANCE +/-0.05 mm IN STEEL DISPLAY RESOLUTION 0.01mm ( Less than 100.0 mm ) 0.1mm( over 100 mm ) BULIT-IN

Brand Name:MITECH

Model Number:MFD660C

Place of Origin:China

Configuration No. Item Qty Remarks Standard config. 1 Main unit 1 With full digital TFT LCD Display 2 Straight Beam Probe 1 4 MHz, Φ10 3 Angle Beam Probe 1 4 MHz, 8 mm×9 mm, 60° 4 Probe Cable 1 Q9-C5,or optional C9- C5 5 Battery Module 1 8.8 amp hour (MB-...

Place of Origin:Beijing

Brand Name:HUATEC

Model Number:HEC-102

...Eddy Current Testing Equipment Digital Portable 60KHz Introduction HEC-102 is a kind of eddy current electrical conductivity meter, which is designed for quick & convenient measurement of material property, such as material separate,quality control,material state check and so on. It uses the electromagnetism testing principle. Testing objects focus on non-ferromagnetic material. Ⅰ,Principle Eddy current...

Brand Name:LEEB

Model Number:Leeb251A

Place of Origin:China

Eddy Current Coating Thickness Gauge NFe Metal Probe Limit Setting Function High Quality NFe Metal Probe And Limit Setting Function Fun Coating Thickness Gauge Functions & Features ● High quality metal probes. ● Two measuring methods:continuous and single; ● Two working mode: direct and batch; ● Limit setting function. ● Switch off automatically or manually. Measuring Materials Eddy Current (NFe): Measuring the thickness of Non...

Model Number:3300

Place of Origin:China

Brand Name:OEM

Non-contact type high reliability 3300 Series of electric eddy current sensor 3300 Series of electric eddy current sensor can non-contact measurement of the measured metal conductor and the probe surface relative displacement, has high reliability, wide ...

Brand Name:Emerson

Model Number:PR6423/004-010

Place of Origin:Germany

... turbomachinery applications such as steam, gas, compressor and hydro turbomachinery, blowers and fans. The purpose of a displacement probe is to measure position or shaft movement without contacting the measured surface – the rotor. In the case of