dummy load for amplifier testing

Brand Name:Vinncom

Model Number:VN-LD-4G-50W-OPF

Place of Origin:CHINA

...Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy

Brand Name:Vinncom

Model Number:VN-LD-4G-30W-OPF

Place of Origin:CHINA

30 Watts 4.3-10 Female 3.8GHz 4GHz RF Dummy Load Termination Better heating shrink Wide band Good VSWR Part Number VN-LD-4G-30W-OPf Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×37dBm) -110 / -120 Application Indoor & Outdoor...

Brand Name:ZD

Model Number:ZD-DL-3Ghz-5W-DM

Place of Origin:China

...Dummy Load with 50 ohm 1. The function of termination/dummy load? a. to test a radio transmitter ,it acts as a protector to be a substitute of antenna. 50ohm dummy load provides proper resitance at final RF amplifier stage b. to prevent away from other radios interference when ajusting and testing the transmmiter c. to be a replacement of the loudspeaker during audio amplifier testing...

Brand Name:Kaixiang

Model Number:AC400V - 500kW

Place of Origin:China

..., generator sets for all main electrical parameters including the dynamic parameters tested. Application AC400V - 500kW Dummy Load Bank can be used with a computer to realize automatically completing the special test and the intelligent control to all

Place of Origin:Hebei,China

Brand Name:Triumph Load

Model Number: AC400-200KW

...Testing Dummy Load Bank offers the most robust, high-capacity designs in the industry. Generator Testing Dummy Load Bank is setting the standard with intelligent operator controls, safety indication layouts, adjustable load step resolution, and lightweight designs. Generator Testing Dummy Load...

Brand Name:YLT

Model Number:Terminations

Place of Origin:China

Wave-guide Terminations 10-600w DC 8.2-12.4 Max VSWR1.15 BJ100 Wave-guide terminations are used to absorb microwave and RF power and as transmitter aging test termination or dummy loads of antenna.

Brand Name:KINGWAY

Model Number:KLB-1000

Place of Origin:CHINA

...Load Bank A load bank is a piece of electrical test equipment used to simulate an electrical load, to test an electric power source without connecting it to its normal operating load. During testing, adjustment, calibration, or verification procedures, a load bank is connected to the output of a power source, such as an electric generator, battery, servo amplifier or photovoltaic system, in place of its usual load. Kingway load

Place of Origin:China

FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(GHz) DC-6 DC-12.4 ...

Place of Origin:Sichuan, China

Brand Name:Sinoscite

Model Number:SNSD

Waveguide Aluminum Material Silver-plated Matched Load Components Quick Details Place of Origin:Sichuan, China Brand Name:sinoscite, Microwave Material:Aluminum material, silver-plating Applications:Microwave test Characteristic:Compact, full bandwidth, ...

Brand Name:ZL

Model Number:ZL-1818

Place of Origin:China

...information: ●The outer surface is made of 40mm thick pure rubber ●Internal use of other materials ●The unique design of the dummy, by adjusting the position of the center of gravity, avoids the dummy from shifting due to the problem of the center of

Brand Name:ZENITHSUN

Model Number:DRLB

Place of Origin:China

200KW10KV,DC Adjustable Portable Reactive Dummy Load Banks,Generator Testig Structure 1.An assembly-type enclosure contains DR series or DQ series or AS series or other high power rating resistors ,connected in series or in parallel. 2.The cabinet ...

Brand Name:Sinuo

Model Number:SN2219-BS

Place of Origin:China

...Test System with Dummy Front Plate Product Description: This advanced Temperature Rise Test System (Model: SN2219-BS) is engineered to rigorously evaluate electrical components under thermal stress, fully compliant with IEC 60884-1:2022 (Clause 19, Figure 20) and BS1363-1/2 standards (Figures 17a, 17b, 30). The system ensures precise temperature monitoring and load...

Brand Name:ELT

Model Number:K-JR-0.5W

Place of Origin:Shaanxi, China

...Load 0.5 Watts DC-40GHz K(2.92mm) Male VSWR ≤ 1.3 Chip Resistor RF load/termination (also known as a dummy load) from Xi'an Elite Electronic is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, etc. Our coaxial radio requency load termination is manufactured in a RF load design. The low-power matched RF load

Brand Name:Ruijia

Place of Origin:China

...Load Cell 3 Axis Force Sensor 5kg,10kg,50kg,100kg Micro 3 Axis load cell Force Sensor Features ◆Capacity :5~100kg ◆Type: Multi force type ◆Defend grade: IP67. ◆ XYZ three axial force, compact structure, high comprehensive precision, high quality alloy steel surface nickel plating. ◆Application: In robot grinding, welding assembly, joint detection, robot tactile force teaching, fatigue testing machine, automobile durability, dummy

Brand Name:Mentek

Model Number:MXB-DC300

Place of Origin:Guangdong, China

...Loading Vibration Testing System Product Description High Frequency Stability Vertical and Horizontal Electrodynamics Vibration Shaker Table uses a digital power amplifier with sinusoidal pulse width modulation. The working principle is: using the high-frequency switching capability of the IGBT FET, the low-voltage signal input by the controller is amplified...

Brand Name:HICORPWELL

Model Number:SMA-K Calibrator

Place of Origin:China

... load ＜-32dB(Return Loss) Material Gold-plated brass Connecting Interface SMA Torque value 0.9 N/m The idea is to create correction ...

Brand Name:LABTONE

Model Number:G-SKT30

Place of Origin:CHINA

...Testing Equipment High Accleration Shock Tester for Smartphone Test Specifications: Model G-SKT30 Operating platform 300 × 300 mm Max. load 30 KG Peak acceleration 200-100000m/s2 (20-10000G) Pulse duration 0.1~30 ms Equipment dimensions 1300×1220×3380 mm Equipment weight 2200 kg Power & Air supply 3phase 380V±10％ 50Hz,5KVA & 0.5—0.7MPa Dual Mass Shock Amplifier - DMSA-3 Table size 160 x 150 mm Max. load...

Place of Origin:China

Brand Name:YOMIN

Model Number:YMS3000

...large output capacity. 2)Automatic adjustment of current measurement range. Fault self-detection in voltage amplifier and current amplifier. 3) Equipped with RS-232C interface, can be operated from software. 4) Test results can be saved to database, can be

Brand Name:ASLI

Model Number:ES-20

Place of Origin:CHINA

...test system.pdf high frequency electodynamic shaker vibration test equipment with mil-std 810G standards Vibration Test System is a vibration test system designed for vibration test of small-size & light-weight electromechanical products with max loading capacity of 30kg. Main Features * An air-cooled electro-dynamic shaker * vibration controller and power amplifier