Product: General Electric DS200IIBDG1ADA IGBT Gate Driver Board DS200 Series Gas Turbine Card in stock now

Description

GE DS200IIBDG1ADA has three major functions in terms of the greater overall drive assembly, including current feedback isolation, isolating motor terminal voltage, and protecting the assembly's gate drive for power insulated gate bipolar transistors or IGBTs. This product exists as a member of GE Industrial Systems' Mark V series of automated drive component parts. Please note that while any information provided here may not be completely accurate, as the dimensions of this PCB component part may be influenced by its three revisions.

The SPEEDTRONIC™ Mark V gas turbine control system is specifically designed for GE gas and steam turbines, and uses a considerable number of CMOS and VLSI chips selected to minimize power dissipation and maximize functionality. The new design dissipates less power than previous generations for equivalent panels. Ambient air at the panel inlet vents should be between 32 F and 72 F (0 C and 40 C) with a humidity between 5 and 95%, non-condensing. The standard panel is a NEMA 1A panel that is 90 inches high, 54 inches wide, 20 inches deep, and weighs approximately 1,200 pounds. Figure 11 shows the panel with doors closed.

For gas turbines, the standard panel runs on 125 volt DC unit battery power, with AC auxiliary input at 120 volt, 50/60 Hz, used for the ignition transformer and the processor. The typical standard panel will require 900 watts of DC and 300 watts of auxiliar y AC power. Alternatively, the auxiliary power can be 240 volt AC 50 Hz, or it can be supplied from an optional black start inverter from the battery.

Recommended Products

We are the supplier for industrial automation spare parts.We specialize in PLC module, DCS card pieces, ESD system card pieces, vibration monitoring system card pieces, steam turbine control system module, gas generator spare parts, we have established the relationship with famouse PLC DCS product maintenance service providers in the world.

Our products are widely used in CNC machinery and metallurgy, oil and gas, petrochemical, chemical, paper printing, textile printing and dyeing, machinery, electronics manufacturing, automobile manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment / environmental protection, municipal engineering, Heating, energy, transmission and distribution industries.

We have large of inventory for our company's advantage products

All of kinds of DCS、PLC parts：

Germany KONRAD:

EC6423 / EC6424 / EC6426 / EC6430 / EC6432 / EC6433 series of eddy current sensors,

EC20382 displacement sensor, MMS7000 monitoring and protection system.

Bently Nevada:

3500 system / 3300 system monitoring and protection system, the front eddy current sensor probe

Germany EPRO

PR6422 / PR6423 / PR6424 / PR6426 eddy current sensor, PR9268 series of electric absolute vibration sensor,MMS6000 system.

ENTEK:

Eddy current sensor probe, vibration monitoring table dual channel shaft vibration watch table C6652.

VIBRO-METER:

Vibration sensor, acceleration sensor, eddy current sensor, monitoring system module gateway communication module.

Rockwell Allen-Bradley:

SLC500: 1747/1746 series

MicroLogix: 1761/1763/1762/1766/1764 series

CompactLogix: 1769/1768 series

Logix5000: 1756/1789/1794/1760/1788 series

PLC-5: 1771/1785 series

Schneider Modicon:

Quantum 140 series: CPU processor module, communication module, analog input and output modules, digital input and output modules.

GE:

IC63 / IC695 / IC697 / IC698 / IC200 / IC660 / IC670 and other CPU modules, communication modules, analog digital modules.

EX2100, EX2000 Excitation system card IS200 series, DS200 series.

Invensys Foxboro:

I / A Series system, FBM (field input / output module) sequence control, trapezoidal logic control, accident recall processing, number

Analog conversion, input / output signal processing, data communication and processing.

Invensys Triconex:

Redundant fault-tolerant control system, and the most modern fault-tolerant controller based on triple-module redundancy (TMR) architecture.

Westinghouse:

OVATION system, WDPF system, WEStation system spare parts.

Honeywell:

Alcont, Experion LS, Experion PKS, Experion HS, Plant Scape,

TDC 2000, TDC3000, TPS, security systems.

ABB:

AC800M series module, industrial robot spare parts DSQC series, Bailey INFI 90,800xA, Advant OCS withMaster Software, Advant OCS with MOD 300 software, Freelance - Distributed control system for the process industry

Symphony Melody, Satt OCS, Symphony DCI System Six, Harmony / INFI 90, security systems, etc.

Emerson:

DeltaV systems, dual-channel redundant security systems, redundant controllers, power modules, and

I / O unit, Analog AI module, Analog AO module.

Siemens:

Siemens MOORE, 6ES5 series, 6GK series, 6DD series, 6AR series.

Yokogawa:

CS3000 system CPU controller module, analog module.

Woodward:

SPC valve position controller, 505 / 505E (9907-162,9907-164,9907-165,9907-167) digital controller,

2301A controller 9905 series, 2301D-ST series