1.3" Inch 240x240 Square Type Free Viewing Angle Small IPS TFT LCD
Display
A compact full-color square screen featuring IPS technology for
true free viewing angles, ideal for embedded and portable devices.
Technical Specifications
| Product | 1.3" Inch Square TFT LCD | Touch Screen | Without Touch Screen (optional for new design) |
|---|
| Resolution | 240x240 Dots | Cover Glass Dimension | Customizable |
|---|
| Viewing Direction | Free Viewing Angle (80/80/80/80) | Interface | SPI |
|---|
| Pin Number | 13 Pins | Connection | FPC Connector Type |
|---|
| Surface Luminance | 200 Cd/m² (nits) | LED Lifetime | 40,000 Hours |
|---|
Product Overview
This small full-color square screen utilizes IPS (planar
conversion) technology to achieve true free full-viewing with
approximately 80° viewing angles in all directions without color
shift or brightness attenuation. The 240*240 square pixel
arrangement provides high pixel density and detailed picture
quality with an effective display area of 23.4*23.4mm.
Key Features
- Mainstream driver IC ST7789 (H2/V2) with standard 4-wire SPI
high-speed interface
- Optional MCU/8-bit parallel or RGB interface configurations
available
- 3.3V power supply with some models supporting 2.8V low voltage
operation
- Ultra-thin module thickness between 1.5-2.3mm
- Supports 262K full-color display capability
- Regular brightness of 350 cd/m² with outdoor enhanced types
reaching 500 cd/m²
- High contrast ratio of approximately 800:1 with fast response speed
- Wide working temperature range (-20℃ to 70℃)
- High ESD protection level
- Compatible with Arduino, STM32, Raspberry Pi and other mainstream
development boards
- Optional resistive/capacitive touch screen for expanded interaction
functions
Typical Applications
- Smart wearable devices: smart watches, bracelets, fitness monitors
- Portable instruments: temperature/humidity/gas detectors,
multimeters, tire pressure monitors
- Maker and open-source hardware: Raspberry Pi/Arduino visualization
panels
- Industrial and medical equipment: PLCs, portable monitors,
injection pumps
- Internet of Things and smart home: gateways, smart switches,
appliance displays
- Consumer electronics: TWS earphone casings, Bluetooth speakers,
power banks
Frequently Asked Questions
I want the LCD display 8 digits and the outline size is
65x30x2.8mm. Is this possible?
Yes, please send us your specifications or drawing. If you don't
have specifications, you can provide samples and we'll recommend
suitable products or customize based on your requirements.
This LCD is what we want, but it's too big. Do you have smaller
sizes? The display content needs minor changes.
For segment type LCD modules, modifying outline size or display
content requires a new LCD glass module with new tooling.
This LCD display is HTN type, but I want STN type. Can you make it?
Yes, we can change the display type according to your request.
I want to customize a new LCD module. Can you do this?
Yes, we can customize. Please send your drawing or provide outline
size, display information, glass thickness, polarizer, display
type, connector mode, storage and operating temperature, supply
voltage, viewing direction, and drive conditions.
What is the lead time for tooling?
Typically 15 to 25 days after drawing confirmation and tooling
charge payment. We'll provide exact timing upon drawing
confirmation.
Can you send samples for checking?
Yes, sample orders are available.
What is the lead time?
For standard products in stock: 1 day after payment. For mass
production of special products: approximately 15-30 days. We'll
notify you if we can finish earlier.
2.29 Inch TFT IPS Display with 8bits RGB Interface and 750 cd/m² Brightness for Industrial Touch Screen Applications
