Product introduction1. The crawler type compost turner belongs to the ground pile
fermentation mode, which is the most economical mode of saving soil
and human resources at present.
2. The material needs to be piled up into a stack, then the
material is stirred and crushed at regular intervals by the turning
machine, and the decomposition of organic matter will be under
aerobic conditions.
3. It also has a broken function, which greatly saves time and
labor force, making the production efficiency and product quality
of the organic fertilizer plant improved significantly, and the
cost reduced greatly.
4. When the turning machine works, the sludge, sticky chicken
manure and other materials can be well stirred with the fungus and
straw powder, creating a better aerobic environment for the
fermentation of materials.
5. It not only ferments faster than deep groove type, but also
effectively prevents the production of harmful and odorous gases
such as hydrogen sulfide, amine gas and indole during fermentation,
which is in line with environmental production requirements.
Performance characteristicsTongda crawler type compost turner has the following
characteristics:
1. The operation is easier and the hydraulic directional type was
eliminated; save the site, artificial, diesel, shorten the working
time, advanced the fermentation cycle.
2. This product has been turned over and separated by soft start.
(The other domestic products of the same kind use iron for iron
hard clutch, which has a serious damage to the chain, bearing and
shaft).
3. Installed front hydraulic push plat, so it is no need to
manually take the whole pile.
4. Cylinder hydraulic lifting.
Working principle1. The bio-organic manure turning machine is a bio-organic
fertilizer made of livestock and poultry manure, agricultural
waste, sugar mill filter sludge, sludge, domestic garbage, etc.
through the principle of oxygen-consuming fermentation to make it
green and environmentally friendly and improve the soil quality.
2. It can reach one day of heating, 3-5 days of deodorization,
sterilization (can completely kill insects and eggs in feces,
etc.), and fertilizer is made in 7 days.
3. It is faster and more efficient than other Mechanical methods of
fermentation.
4. According to customer requirements can also add some auxiliary
facilities, such as automatic sprinklers, etc.
Model | TDLDF-2400 | TDLDF-2600 | TDLDF-3000 | TDLDF-3000 (Full Hydraulic) |
Turning Width(mm) | 2400 | 2600 | 3000 | 3000 |
Turning Height(mm) | 600-1000 | 1100-1300 | 1300-1500 | 1600-1800 |
Row Spacing(mm) | 800-1000 | 800-1000 | 800-1000 | 100-1000 |
Max.Diameter of Material Particles(mm) | 250 | 250 | 250 | 250 |
Power(horsepower) | 75 | 116 | 136 | 143 |
Working Knife Diameter(mm) | 400 | 500 | 500 | 800 |
Working Speed(m/min) | 6-10 | 6-10 | 6-10 | 6-10 |
Capacity(m³/h) | 500-700 | 1000-1200 | 1300-1500 | 1500-1800 |