1-CH Encoder pulse counter or 2-CH DI high-speed counter, WJ150-485

Features:
>> Encoder decoding and converting into standard Modbus RTU protocol
>> Can be used as encoder counter or speed measurement
>> Support encoder counting, can identify forward and reverse
>> It can also be set as 2 independent DI high-speed counters
>> The count value supports automatic saving after power failure
>> DI input supports PNP and NPN input
>> Filter time can be set for relay and mechanical switch input
>> The count value can be cleared and set through the RS-485 interface
>> Wide power supply range: 8 ~ 32VDC
>> High reliability, convenient programming and easy application
>> Standard DIN35 rail installation, convenient for centralized wiring
>> User can programmatically set module address, baud rate, etc.
Typical application:
>> Encoder pulse signal measurement
>> Flow meter pulse counting or flow measurement
>> Line product count
>> Counting the number of logistics parcels Figure 1 Appearance of WJ150 module
>> Proximity switch pulse signal measurement
>> The encoder signal is transmitted to the industrial computer
>> Water meter or electricity meter pulse count
>> Smart Factory and Industrial Internet of Things

WJ150 general parameters:

(typical @ +25℃, Vs is 24VDC)

Input type: Encoder AB signal input, 8 channels (A0/B0~ A7/B7).

Low level: input <1V

High level: input 3.5 ~ 30V

The frequency range is 0-10KHz (all channels are input at the same time), and a single channel can support 50KHz input.

Encoder counting range-2147483647 ~ +2147483647, automatically saved when power off

DI counter range 0 ~ 4294967295, reset after power off

Input resistance: 30KΩ

Communication: Protocol RS-485 or RS-232 standard character protocol and MODBUS RTU communication protocol

Baud rate (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) can be selected by software

Address (0～255) can be selected by software

Communication response time: 100 ms max

Working power supply: +8 ~ 32VDC wide power supply range, internal anti-reverse connection and overvoltage protection circuit

Power consumption: less than 1W

Working temperature:-45 ~ +80℃

Working humidity: 10 ~ 90% (non-condensing)

Storage temperature:-45 ~ +80℃

Storage humidity: 10 ~ 95% (no condensation)

Dimensions: 106 mm x 59mm x 24mm

   Shenzhen WAYJUN Industrial Automation is a HI-tech company of designing, researching 4-20mA/0-5V to RS485 Data Acquisition Module,analog signal isolated converter / conditioners,Ethernet I/O Module,PT100 temperature /speed/frequency signal isolators/splitter,isolated amplifier,Digital Signal to RS485/232 Module,Min-power DC DC converters.Our products also carry the CE approval for safety.

WAYJUN's products are widely used in the industry power fields of control, electric power, electronic instrument, medical electronic, rail transit, communication, telecom, automation,Medical and Test & Measurement etc.Our products are sold all over the world.Create maximum value for customers is our constant aim.More details,please check: www dot wayjun dot net.

WAYJUN products series:
1. Remote I/O isolation module
WJ21 series -------- 4-20mA/0-10V to RS485/232 AD converter
WJ31 series -------- RS485/232 to 4-20mA/0-10V DA converter
WJ28 series -------- 8 channels 4-20mA/0-10V to RS485/232 AD converter
WJ70 series -------- 4-ch DI 4-ch relay output, RS485/232 remote data acquisition module
WJ61 series --------16-ch DI switch / dry contact signal to RS485/232
WJ62 series -------- 8-ch DI switch signal to RS485/232 remote I/O modules
WJ60 series -------- 8-ch DI 8-ch DO switch to RS485/232 remote I/O modules

2. Analog signal isolator / transmitter:
DIN35 rail-mounted
DIN11 IAP-V (A) -P-V (A) ---- photoelectric isolation signal transmitter (one in one out)
DIN12 IAP-V (A) -P-V (A) ----- voltage / current signal splitter (one in two out)
DIN14 IAP-V (A) -P-V (A) ----- voltage / current signal splitter (one in four out)
DIN22 IAP-V (A) -P-V (A) ----- voltage/current signal isolated transmitter(two in two out)
DIN44 IAP-V (A) -P-V (A) ------ voltage/current signal isolated transmitter(four in four out)
WJ11 IAP-Z-T-P-A (V) ----------- PT100 thermal resistance temperature signal isolation transmitter
DIN22 IAP-Z-T-P-A (V) ----------- PT100 thermal resistance temperature signal isolation transmitter (two out of two)
DIN12 IAP-Z-T-P-A (V) ----------- PT100 thermal resistance temperature signal isolation splitter (one in two out)
DIN11 IAP-F-P-V (A)-----------frequency to voltage / current signal isolated transmitter
DIN11 IAP-V (A) -P-F----------voltage / current signal frequency isolation transmitter
DIN11 IAP-R-P-V (A) --------- Potentiometer /resistance signal isolated transmitter
DIN11 IAP-S-P-O-----------speed sensor signal isolated transmitter, sine waveshaping
DIN33 IAP-S-P-O------------------- encoder differential signal to pulse signal transmitter
DIN11D IAP-V (A) -P-V (A) -------- large current output signal isolator
DIN11 IAP 4-20mA------------------4-20mA passive signal isolator
DIN22 IAP 4-20mA------------------4-20mA passive signal isolator (two in two out)
DIN11 IAP 100LF-------------------- passive isolation 4-20mA signal distributor
DIN11 IAP 100LP-------------------- passive isolation 4-20mA signal conditioner
In addition, DC voltage / current signal isolators also have PCB package.